# Fail2Ban: Basic set up for an exposed system ## Contents - [Overview](#overview) - [Installing an up-to-date Fail2Ban version](#installing-an-up-to-date-fail2ban-version) - [Customizing your set up](#customizing-your-set-up) - [/etc/fail2ban/fail2ban.conf](#etcfail2banfail2banconf) - [loglevel](#loglevel) - [logtarget](#logtarget) - [dbpurgeage](#dbpurgeage) - [/etc/fail2ban/jail.local](#etcfail2banjaillocal) - [ignoreip](#ignoreip) - [Timeframes](#timeframes) - [Actions](#actions) - [Notication options](#notication-options) - [Shortcuts](#shortcuts) - [Jails](#jails) - [sshd (/etc/fail2ban/jail.d/ssh.conf)](#sshd-etcfail2banjaildsshconf) - [UFW port probing](#ufw-port-probing) - [Name of the jail](#name-of-the-jail) - [Ports and IPs](#ports-and-ips) - [Timeframes](#timeframes) - [Jail-specific settings](#jail-specific-settings) - [The UFW filter regex (/etc/fail2ban/filter.d/ufw-probe.conf)](#the-ufw-filter-regex-etcfail2banfilterdufw-probeconf) - [The action file (/etc/fail2ban/action.d/ufw.conf)](#the-action-file-etcfail2banactiondufwconf) - [Final thoughts](#final-thoughts) ## Overview This is a basic set up for Fail2Ban on an system that is directly exposed to the internet (i.e. not behind a separate firewall). **This set-up assumes you are using UFW as your firewall front-end and it is working correctly.** In addition to the standard SSHd jail, a separate jail that monitors UFW BLOCK reports (i.e. connection attempts to closed ports, etc.) is activated. This should aid in blocking 'scriptkiddies' and port-scanning attacks, reducing the resources your server has to allocate to processing bogus requests. F2B will automatically create UFW rules to drop connections from systems that try to make repeated invalid connection attempts and then remove the block automatically after the 'bantime' has expired. ## Installing an up-to-date Fail2Ban version The F2B version available via apt for Debian/Ubuntu is old and does *not* support IP6 (as at the time of this document being written). So let's grab a newer version from the source at github. *Note: Only versions 0.10+ offer IP6 support.* - Switch to your home directory or somewhere you can work with downloaded files. - Get the latest version of Fail2Ban, switch to the created directory and install it using the python installer script. ```Bash # get latest fail2ban version git clone https://github.com/fail2ban/fail2ban.git # change to the newly created directory containing f2b cd fail2ban # run the installer sudo python setup.py install ``` - Let's test the installation by running fail2ban-client. If it displays the help screen, then things are probably set up properly. ```Bash fail2ban-client -h ``` - Now, let's configure systemd to load fail2ban automatically on system start-up. ```Bash # copy the service file to the correct location sudo cp files/debian-initd /etc/init.d/fail2ban # tell systemd to refresh itself to recognize the new service sudo update-rc.d fail2ban defaults ``` - Let's go ahead and start the service to make sure it doesn't run into any problems. You should not see any errors reported and should have a pleasant 'green dot' showing up. ```Bash # start the service sudo systemctl start fail2ban.service # check it's status for any errors sudo systemctl status fail2ban.service ``` - One more test just to be sure everything is set up. You should see f2b report it's version without any errors being generated. ```Bash fail2ban-client version ``` ## Customizing your set up As with all Fail2Ban setups, you should do all your customization in the *.local* files and not the .conf files since those may be overwritten by updates. ### /etc/fail2ban/fail2ban.conf I recommend reviewing the following settings at a minimum for any deployment: #### loglevel This sets the verbosity of the log output from F2B. The default setting of INFO is appropriate for most installs but, you should specify it anyway so you have an easy place to change it if you need to do so. ```Ini loglevel = INFO ``` #### logtarget This controls the location of the F2B log file where it logs it's own actions. This is NOT the location of the log files it reads for banning! Again, the default is appropriate for most installs, but you should specify it in your custom configuration so you have an easy place to change it if needed. ```Ini logtarget = /var/log/fail2ban.log ``` #### dbpurgeage This controls how long F2B keeps a record of systems it has banned for whatever reason. By default, this is set to one day. I prefer having a one week record so I can go back and review as necessary. You can set it to whatever you want, duration is expressed in *seconds*. ```Ini dbpurgeage = 604800 ``` ### /etc/fail2ban/jail.local This file customizes the defaults applied to all jail configurations used by F2B. This sets things like the default amount of time a system is banned, what actions should be used for banning systems and whether or not you get email notifications, etc. #### ignoreip This setting tells F2B which IP addresses/ranges/hostnames should **never** be banned. In general, this should be the localhost only. However, if you connect by remote using a particular machine, you might also want to exempt it from any possible bans. You can specify more than one entry by separating them with a space or comma. In this case, I've added the IP4 and IP6 defintions for localhost. ```Ini ignoreip = 127.0.0.1/8 ::1 ``` #### Timeframes You should customize the relevant timeframes to your requirements and this will likely take a little experimentation. F2B checks for a system making '*maxretry*' failed attempts to connect or login within '*findtime*' seconds and, if that happens, bans the system for '*bantime*' seconds. I like using settings as below which state, "ban any system for 30 minutes that makes 5 invalid connection attempts within a 5 minute period". ```Ini bantime = 1800 maxretry = 5 findtime = 300 ``` Some people find this too aggressive and prefer settings such as 10 attempts in 20 minutes, for example, which would look like: ```Ini bantime = 1800 maxretry = 10 findtime = 1200 ``` Again, this will be up to you to determine what is appropriate for your environment and users. Remember that invididual jails can override these defaults. #### Actions ##### Notication options If you choose actions that involve sending email notifications, you need to let F2B know where to send those emails and who should send them. It's pretty straightforward, so this is the general setup: ```Ini destemail = account@domain.tld sender = thismachine@domain.tld mta = sendmail ``` The '*mta*' field is very likely correct for your system but, if you are using a different MTA, you'll want to specify that here. ##### Shortcuts This is where you tell F2B exactly what to do when it finds a reason to ban a system based on the jail configuration. Again, individual jails can override these settings. The settings are defined backwards in this file, so I'll take a second to explain. '*action*' is performed each time a system should be banned. There are several predefined actions listed in the /etc/fail2ban/jail.conf file which you can use and are often sufficient for most setups. Read the comments in that file to understand what each predefined action does. In my case, I like getting an email along with a few lines from the log telling me what they did to get banned. Within '*action*' is '*banaction*' which is a link over to a specific configuration file telling F2B what to do on the system to enforce the ban. In this setup, we direct F2B to look at the ufw.conf file to see how to modify UFW's rules so it drops packets from the offending system. [Details on that file are found later in this document](#The-action-file-(/etc/fail2ban/action.d/ufw.conf)). The general setup as described above is as follows: ```Ini banaction = ufw action = %(action_mwl)s ``` ## Jails F2B uses '*jail configurations*' specified either in */etc/fail2ban/jail.conf*, */etc/fail2ban/jail.local* or in */etc/fail2ban/jail.d/*. The latter is my preference since it allows for each jail to be contained in it's own configuration file which makes debugging and maintaining them much easier. ### sshd (/etc/fail2ban/jail.d/ssh.conf) I usually just define a basic jail for *sshd* which is the SSH server. You can add additional SSH jails as you wish to this file, but I keep it pretty simple. One note, I run my SSH server on a non-standard port, so be sure you fill in the correct port for your environment such as my example below of port 222: ```Ini [sshd] port = 222 ... ``` If you are running on the standard port 22, then you can actually omit this line entirely since it's already defined in the default .conf files. Also note that if you have customized your SSHd configuration to use non-standard logging, you'll want to specify a logfile location in the jail also, like this: ```Ini [sshd] ... logpath = /path/to/your/log.file ... ``` ### UFW port probing This is probably the part you are really looking for in this entire set-up. We will create a custom jail that monitors UFW's logs for any mention of *[UFW BLOCK]* and then proceeds to ban those systems attempting to connect to blocked ports as per your timeframe settings. I've commented the ufw-probe file but I'll run though it here also for convenience. #### Name of the jail You can call this anything that has meaning to you, I've chosen '*ufw-probe*'. Just change what it says in the [square brackets] ```Ini [ufw-probe] ... ``` #### Ports and IPs Since this is searching for port probing, we will tell F2B to look for attempts made to connect to any and all ports. **The '*ignoreip*' parameter is only necessary IF it's different from what you've already set in '*jail.local*'.** ```Ini port = all ignoreip = 127.0.0.1/8 ::1 ``` #### Timeframes This section is also optional and is only needed if it's different from what you have in your '*jail.local*'. I like keeping it in this configuration file though since the settings for this jail are often different from others. ```Ini maxretry = 5 findtime = 300 ``` #### Jail-specific settings In order for this jail to function, you need to give F2B a little information. First, we need to specify what log file it should be parsing. In this case, it's the UFW log file which is, by default, located at */var/log/ufw.log*. If you've changed this, then update the '*logpath*' parameter. We also need to tell it what filter to use when parsing the file, in this case, it's a filter I've called 'ufw-probe' (change this if you change the filename) which is located at */etc/fail2ban/filter.d/ufw-probe.conf* [(details here)](#The-UFW-filter-regex-(/etc/fail2ban/filter.d/ufw-probe.conf)). Finally, we tell F2B to enable this jail. ```Ini logpath = /var/log/ufw.log filter = ufw-probe enabled = true ``` ## The UFW filter regex (/etc/fail2ban/filter.d/ufw-probe.conf) When F2B is parsing *ufw.log*, it has to be told what entry denotes a failure and increments the retry counter toward a ban. This is done via a regular expression (REGEX): ```PHP .*\[UFW BLOCK\] IN=.* SRC= ``` Specifically, this matches any line containing '*[UFW BLOCK]*' and includes the source IP address '**' ## The action file (/etc/fail2ban/action.d/ufw.conf) This is the file that tells F2B what commands to send to UFW to block and unblock a system. If you downloaded a fairly recent version of F2B, then you should already have this file. If not, you can copy the one in this git. You can see that the '*actionban*' and '*actionunban*' sections simply add and remove rules from UFW which drop/reject packets from the offending system. I have only changed the '*blocktype*' from it's default (reject) to *deny*. ```Ini # Option: blocktype # Notes.: reject or deny #blocktype = reject blocktype = deny ``` The important part of '*actionban*' works like this: ```PHP ufw insert from to ``` The variables defined in the configuration file are summarized as: ```Ini [Init] insertpos = 1 blocktype = deny destination = any application = ``` So, this rule adds a new rule (*insert*) at position 1 (*insertpos*) which denies (*blocktype*) packets from the offending system's IP (*ip*) destined for any address (which obviously includes this system). Importantly, each rule is added at *position 1* which means they have priority over any other otherwise defined (i.e. allowed) traffic. The '*actionunban*' simply deletes the rule to remove the block. ## Final thoughts Well, that's it. Fail2Ban will now monitor SSH intrusion attempts and will also search the logs for any systems that try to connect to blocked ports looking for an entry vector into your system. It will then block those systems automatically for whatever timeframe you specify and then remove that block. So you don't have to maintain IP block/allow lists manually anymore! I hope this helps you in dealing with your server getting bombarded by irritating scanning-bots. As always, [check out my blog at https://mytechiethoughts.com](https://mytechiethoughts.com) for more solutions like this and feel free to contribute comments, suggestions and improvements!